Sceptre Monitor Keeps Turning OFF [Causes & 6 Proven Fixes]

Sceptors monitors are the most reliable monitors for users because of their ultra HD screen resolution and long-lasting quality. 

I’ve been having trouble with my Sceptre monitor lately. Every few minutes, it just turns off completely, and I have to turn it back on again. 

It’s incredibly frustrating, especially when I’m in the middle of something important. 

I’ve tried all the usual troubleshooting steps, but nothing works – so then I contacted some experts for help. 

I found some ways to fix my monitor’s problem. I will share my experience to help those facing the same issue I faced. 

Hopefully, I’ll provide a few solutions to stop this annoyance once and for all.

Here is a Step-by-Step Process to Fix This Issue:

  1. Power Cycle Your Sceptre Monitor
  2. Check Power Cables
  3. Check HDMI Cables
  4. Check HDMI Input 
  5. Check Power Socket
  6. Change Sceptre Monitor

How to Stop a Sceptre Monitor From Turning Off?

sceptre monitor keeps turning off

1- Power Cycle Your Sceptre Monitor

Power cycling your Sceptre monitor can help to prevent the issue of it suddenly turning off. 

Power cycling is completely shutting off your monitor, and unplugging its power cord from the wall outlet. 

This will reset any existing settings or issues causing the problem. 

Also, if you have a surge protector or a power strip, you should unplug and replug those. 

Follow these simple steps for a power cycle of your Sceptre monitor:

1. Turn off the monitor by pressing the power button and unplug all cables from the unit.

2. Wait at least 5 seconds before plugging cables back into the unit again, ensuring that the computer’s power cord and signal cable are correctly connected.

3. Turn on your monitor by pressing the power button again, allow a few moments for it to start up, and adjust its settings for optimal performance.

4. Once everything is set up and running smoothly, you should be able to enjoy using your Sceptre monitor without any further problems.

2- Check Power Cables

The best way to determine if the issue with your Sceptre monitor turning off is related to damaged or broken power cables is to check them thoroughly. 

Start by unplugging the power cable from your computer and the wall outlet. 

Inspect each end of the power cable for any damage, wear and tear, or corrosion. 

Look for breaks in the insulation of exposed wiring, as these can cause electrical continuity problems and lead to sudden shutdowns.

Next, try swapping out the power cable for a new one if you find any signs of damage. 

This will help ensure that you don’t need to replace any of your other equipment if there is an electrical fault in your current power cable. 

If the monitor still turns off after replacing the power cable, further investigation may be required, such as HDMI Cable checking.

If there are any compatibility issues between your hardware components or something is wrong with your graphics card.

3- Check HDMI Cables

When a Sceptre monitor keeps turning off, one of the steps is to check if the HDMI cables are damaged or broken. 

Before replacing the HDMI cable, if applicable, ensure there aren’t any other issues with the monitor itself.

Ensure that all connections are secure and that none of the cables have been bent or twisted. 

If any pins on the HDMI cable are deformed, this may be causing the issue. 

If you identify any damage to the cables, replacing them with new ones immediately is recommended.

If your Sceptre monitor continues to turn off even after checking and replacing it if necessary, then it could be a sign of an internal problem with your monitor. 

4- Check HDMI Input

If your Sceptre monitor keeps turning off, another issue could be with the HDMI Input. 

The HDMI Input is a cable that connects your monitor to a laptop, PC, gaming console, or other device and carries audio and video from one gadget to another so you can watch content on your monitor. 

If your HDMI Input is dirty or has been used for a long time, it might be damaged and need replacing.

To check if your HDMI input is the problem, unplug the cable and inspect it for any damage or dust. 

If there are no visible signs of damage but dust present, clean it carefully with a soft cloth or cotton bud if necessary. 

If this doesn’t improve the situation, try connecting the cable to a different device to see if that works better.

Also worth considering is whether your Sceptre monitor is too old, causing problems with its compatibility with modern-day devices. 

To find out if this might be a problem, check the model number of your Sceptre monitor online to discover its age. 

5- Check the Power Socket

A power socket problem can be why your scepter monitor is constantly turning off. 

The issue may happen if the power socket is old or damaged and cannot handle the surge of electricity required to keep the monitor running smoothly. 

Alternatively, a short circuit called a dust flash could also occur if it gets too dusty.

To check whether your power socket is causing any issues or not, you can use a multimeter to measure if there’s an electrical current running through it. 

Disengage all other electronic devices from this power socket and plug in your Sceptre monitor only, then use the multimeter to check for electric current. 

If there isn’t electricity, replace the power outlet immediately.

If neither of these solutions fixes the issue, consider using another power socket instead, which may be more reliable than your existing one. 

Make sure that this new power socket has enough watts to handle the load of your Sceptre monitor and that it’s appropriately installed into an outlet with no loose wiring or connections before plugging in your equipment.

6- Change Sceptre Monitor

Changing a Sceptre Monitor can be an easy, cost-effective solution if your current monitor is exhibiting technical issues. 

If you’re experiencing frequent unexpected shutdowns, blurry picture quality, or abnormal display settings, consider getting a new Sceptre monitor.

Conclusion

If your Sceptre monitor keeps turning off, you should try these troubleshooting steps.

  1. Power cycle your monitor.
  2. Check its power cable.
  3. Check HDMI cables.
  4. Inspect HDMI input.
  5. Try a different wall outlet.

If none of these work for your monitor, you should contact the Sceptre support team. Because they have experts who can help you to identify and fix this issue. 

However, if everything goes in vain, then I would suggest you buy a new monitor.

Related FAQs

Why Does My Monitor Keep Shutting Off?

If your monitor repeatedly shuts off, it could be due to faulty or loose power cables. This can cause intermittent power loss and cause the monitor to shut off. 

Try checking the cable connection or replacing the cable altogether. Additionally, make sure the outlet is functioning properly.

How do I reset my Sceptre monitor?

If you want to reset your Sceptre monitor, follow these steps: 

  1. Firstly turn off the monitor by pressing the power button
  2. Unplug the power cable from the back of the monitor. 
  3. Press and hold the “Menu” button on the monitor for 10-15 seconds. 
  4. While holding the “Menu” button, plug the power cable back into the monitor and hold it for an additional 10-15 seconds. 
  5. Release the “Menu” button and turn your monitor back on. 

Your Sceptre monitor should now be reset to its default settings with any changes lost after it is done.

Sceptre Monitor Blue Light Blinking

Acer Monitor Keeps Going Black

Samsung Monitor Keeps Turning OFF

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top